Molding Balloon Inflator-One nozzle
$249.00 $219.00
Modeling balloon inflator with folding handle and touch-on switch
REGULAR PRICE, $249, FLOAT ONLY SPECIAL PRICE THIS WEEK $219.00. Modeling balloon inflator with folding handle and touch-on switch
Voltage: 110V-240V
Lithium battery: 12V 6600mAh
For 160/ 250 and 5″ balloons
Battery and two motors inside
Can connect two inflators together to use at the same time.
| Weight | 6 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Voltage | 110V-240V |
| Battery | Lithium battery 12V 6600mAh |
| Switch | Touch-on switch |
1 review for Molding Balloon Inflator-One nozzle
Add a review
Related Products
Sale!
Balloon Inflators
Sale!
Balloon Inflators
Sale!
Balloon Inflators
Sale!
Balloon Inflators
Katie baker –
I love the pump but did not get any manual on how to use it. Its quiet, not heavy but not sure about the timmer. A little bummed.
Admin. –
There is no bulky manual for the inflator. Just a one page instruction sheet….usually. The only controls are on off button. A green start button. And then two buttons to set the timer. One button is sort of “enter” key or button. Hit it to initiate setting timer LED will flash in one of the number windows. second button is up increment button for timer. Press repeatedly to get time in first window. Then press “enter” button to set that number and move on to second window LED. Again, press second button to desired setting. Then press “Enter” button to save setting. Green button starts the timed inflation.
Power on off resets all windows to zero number. In this mode, the green button will be on when down, off as soon as released.